Introduction
This document [Adobe Acrobat (pdf) version ] is intended to
offer guidance to users of electronic mail (e-mail) systems.
This is not a "how-to" document, but rather a document that
offers advice to make you more computer-worthy (probably more worthy than you
desire) and to prevent you from embarrassing yourself at some point in the near
future.
To, Cc and Bcc
With only three choices for addressing an e-mail, i.e. the 'To', 'Cc'
and 'Bcc' fields, you would think addressing would be trouble free.
Unfortunately, that's not the case.
First, there are the users who have no idea that the 'Cc' exists. Every
address is listed in the 'To' even if the email is only directed to one person.
In cases such as this the receivers have no clue as to who should take action
so either they all do something or they all do nothing.
Secondly, there are users who feel that every single e-mail should be
copied to their entire address book whether it's relevant to those receiving it
or not. These are the 'cry for attention' crowd.
Lastly, there are users who never read the names of the people who
receive a copy of an e-mail. They are the 'Did you see this?' crowd. For
example, person X sends an e-mail to persons A, B and C. C immediately forwards
it to A and B with the question 'Did you see this?' not bothering to see that X
already sent A and B copies.
In summary, here's a rough guide on how to populate the address fields:
The addresses in the 'To' are for the people you are directly
addressing.
The addresses in the 'Cc' are for the people you are indirectly
addressing. They are the FYI-ers or CYA-ers. Don't overdo it here. Copy only
those who need to be copied; not your entire universe of contacts.
The addresses in the 'Bcc' are like 'Cc' except that the addresses in
'To' and 'Cc' do not know that the addresses in the 'Bcc' are included in the
conversation. The 'To' and 'Cc' addresses are blind to the 'Bcc' addresses. As
you can imagine, use of the 'Bcc' is somewhat unethical and therefore its use
is discouraged.
Reply To All
The 'Reply to All' button is just a button, but it can generate tons of
unnecessary e-mails. For example, if I send a dozen people an e-mail asking if
they are available at a certain time for a meeting I should get a dozen replies
and that's it. However, if each person hits the "Reply to All' button not
only do I get a dozen replies, but so does everyone else for a total of 144
messages!
I'm not saying that the 'Reply to All' button should not be used. I'm
saying that it should be used with care.
Don't Be A Novelist
Messages should be concise and to the point. Think of it as a telephone
conversation, except you are typing instead of speaking. Nobody has ever won a
Pulitzer Prize for a telephone conversation nor will they win one for an e-mail
message.
It's also important to remember that some people receive hundreds of
e-mail messages a day (yes, there are such people), so the last thing they want
to see is a message from someone who thinks he/she is the next Dickens.
Too Much Punctuation!!!
Don't get caught up in grammar and punctuation, especially excessive
punctuation. You'll see lots of e-mail messages where people put a dozen exclamation
points at the end of a sentence for added emphasis. Big deal. Exclamation
points (called "bangs" in computer circles) are just another form of
ending a sentence.
If something is important it should be reflected in your text, not in
your punctuation.
Formatting Is Not Everything
Formatting can be everything, but not here. Plain text is it. Period.
End of sentence.
Using HTML, or heaven forbid the Microsquish Rich Text Format, to format
messages so that they have fancy fonts, colors or whatever is asking for
trouble. There are lots of e-mail clients (and some servers) which cannot
handle messages in these formats. The message will come in as utter gibberish
or in the worst case, crash the e-mail client. I've seen it happen.
If you absolutely, positively feel that it's good karma to use HTML
e-mail, stick with the default fonts and simple formatting. Leave the colorful
backgrounds, scripty fonts and animated images for your personal web site.
Abbreviations
Abbreviation usage is quite rampant with e-mail. In the quest to save
keystrokes, users have traded clarity for confusion (unless you understand the
abbreviations). Some of the more common abbreviations are listed in the table
below. I would recommend that you use abbreviations that are already common to the
English language, such as 'FYI' and 'BTW'. Beyond that, you run the risk of
confusing your recipient.
This
|
Means
This
|
BCNU
|
be
seeing you
|
BTW
|
by the
way
|
FWIW
|
for
what it's worth
|
FYI
|
for
your information
|
IMHO
|
in my
humble opinion
|
OBO
|
or best
offer
|
ROTFL
|
rolling
on the floor laughing
|
RTFM
|
read
the funny manual
|
TNSTAAFL
|
there's
no such thing as a free lunch
|
TTFN
|
ta ta
for now
|
TTYL
|
talk to
you later
|
Smilies
Part of the nature of a good one-on-one conversation is the use of
visual cues. How important are facial expressions and body gestures to a
conversation? A simple eye movement can mean the difference between
"yes" and "YES". What about auditory cues? The results are
the same.
Since there are no visual or auditory cues with e-mail, users have come
up with something called "smilies". They are simple strings of
characters that are interspersed in the e-mail text to convey the writer's
emotions (cues). The most common example is :-). Turn your head to the left and
you should see a happy face (the colon are the eyes, the dash is the nose and
the parentheses is the mouth). Here are some more examples.
This
|
Means
This
|
:-)
|
Smiley
face
|
;-)
|
Wink
(light sarcasm)
|
:-|
|
Indifference
|
:->
|
Devilish
grin (heavy sarcasm)
|
8-)
|
Eye-glasses
|
:-D
|
Shock
or surprise
|
:-/
|
Perplexed
|
:-(
|
Frown
(anger or displeasure)
|
:-P
|
Wry
smile
|
;-}
|
Leer
|
:-Q
|
Smoker
|
:-e
|
Disappointment
|
:-@
|
Scream
|
:-O
|
Yell
|
:-*
|
Drunk
|
:-{}
|
Wears
lipstick
|
Please don't ask me to interpret, because I don't understand them all.
They are typically found at the end of sentences and will usually refer
back to the prior statement.
I would recommend you use these sparingly. There are hundreds of these
things and their translations are by no means universal (a miss-interpreted smile
could lead to a flame).
Salutations
The question here is "How personal is too personal?" or to be
more specific, how you open your e-mail: "Dear Sir", "Dear Mr.
Smith", "Joe" or none of the afore-mentioned.
If you posed this question to Miss Manners, I expect she would come back
with a quick answer - use the standard formalities -- but I don't know that I would
agree.
In a non-business situation, I would recommend that you bypass the
standard formalities. At most, I would only include something along the lines
of "Dear Virgil" or just "Virgil".
In the business situation, things are much more complicated. Each
situation will need to be evaluated on its on, but in general, I would use the
following as a guide: If you normally address a person as Miss/Mrs. /Ms. /Mr.
Smith then that's the way I would initially address them in e-mail. If you
normally call them by their first name then I would either omit the salutation
or follow the guideline specified in the prior paragraph. If you are unsure,
stick to the formal salutation. It's the safest bet.
Signatures
If you had to guess what a signature was (the e-mail version), you would
probably be close.
On a paper document (save a tree, send e-mail) it's typical to close the
document with the following:
Gene Wicker, Jr.
I Will Follow... Services
Since it's not possible (yet) to sign your e-mail, users will sometimes
include the same information (minus the signature) at the bottom of their
e-mail messages.
I would highly recommend this practice because the originator is not
always clear to the recipient. Lots of companies use abbreviated names or
numbers for employee e-mail addresses and those abbreviations or numbers will
mean little to someone not familiar with their significance.
I would also recommend that you included your e-mail address in this
information. Sometimes it can be very difficult to locate your e-mail address
in the information that's a part of transmission, especially if it's going
across the Internet.
If your e-mail address is a business address, I would include your title
and company name in the signature. Normally, this might be part of a
letterhead, but in the e-mail world letterheads are not used (wasted space).
You will sometimes run across a user's signature that contains a quote
(as in "...the secret to life is that there is no secret.") after the
person's name. This has become a fairly common practice. If you choose this
option I would recommend that the quote be something that is a reflection of
yourself. Keep it short. You don't want the quote to be longer than the message.
Also you will run across signatures that contain images built out of
keyboard characters. These are kind of hard to describe unless you've seen one,
but you will surely know one when you see it. As with the quote, the image
should be a reflection of the person.
Whether you choose to add a quote, an image or both, I would recommend
that you keep the total number of lines for the signature down to four or less.
Attachments
Back in dial-up days I would have recommended that all attachments be
held to 1MB in size. However, in today's ever expanding broadband world, things
are a little different.
For users on dial-up, the 1MB limit still applies. For users on
broadband or a direct connection, I would up the limit to 5MB. HOWEVER, this is
not a blanket recommendation to send attachments of this size. Even if user is
on broadband or a direct connection, there is no guarantee that their mailbox
can handle it. With limits this small you can see that sending someone a 5MB
attachment will quickly fill their mailbox and cause other e-mails to bounce.
Generally, the only time I send attachments of the 5MB size is when I
know the other party is expect it.
vCards
vCards are simply a nightmare for a user of Outlook (which I am). They
make every e-mail appear as if it has an attachment. It does in one respect,
but it's not what you would normally consider an attachment i.e. a document, a
spreadsheet, etc. Therefore, I recommend against using them.
Threads
Once you send that first e-mail, you will probably get a response. If you
want to reply to that response what should you do? The wrong thing to do is to
start a new e-mail message. This breaks the link (called a "thread")
between the original message and your soon-to-be-created response. Without the
link, it can get difficult for the users on each end to follow the sequence of
messages, especially after several exchanges. This becomes an even larger
problem when you are dealing with newsgroups (more later) where several people
may be replying to messages and trying to follow the thread of exchanged
information. The correct thing to do is to reply, which is essentially the same
thing as creating a new message, but maintains the thread.
Quotes
Nothing is more wasteful than to reply to an e-mail by including a
complete copy of the original with the words "I agree",
"Okay" or "Ditto" at the bottom.
The correct method is to use quoting. This is best explained by an
example:
>and do you agree with the proposal to hire Ms. Ross to
>handle our legal services?
Yes. Please make the necessary arrangements.
>handle our legal services?
Yes. Please make the necessary arrangements.
The '>' in front of the text indicates to the recipient that this is
quoted material from his/her last e-mail message. The second sentence is your
response to the quoted material. The key with quoting is to include enough
material in the quote so that it will be relevant to the recipient. Imagine
that the original message was a hundred lines long and the only question that
required a response was located in the last sentence. Why send the whole
message back in the reply? That would cause the recipient to scroll through the
hundred line message again just to find your response at the bottom.
Quoting can occur again and again as in the example:
>>and do you agree with the proposal to hire Ms. Ross to
>>handle our legal services?
>>Yes. Please make the necessary arrangements.
Arrangements made. Our first meeting is scheduled for tomorrow morning.
>>handle our legal services?
>>Yes. Please make the necessary arrangements.
Arrangements made. Our first meeting is scheduled for tomorrow morning.
From this we see both two level quoting (>>) and one level quoting
(>). The (>>) indicate that the sender is quoting your quote and the
(>) is a quote of part of your message you sent in reply.
Don't get hung up in quoting. After so many levels, all you end up with
is a bunch of ">" and very little substance.
Save A Tree
Sometimes I think that the best thing that could happen would be for
someone to take away the printer. Why? Every time I send an e-mail out to a
large group, a third of the group will print the message even before reading
it, a third will read it and then print it, and the last third will simply
delete it.
One of the goals for e-mail usage is to eliminate (or greatly reduce)
the shuffling of paper, but what chance does that have if a significant number
of people are going to print every message they receive. I'm not saying that
all messages should not be printed. I'm saying that too many messages are
printed for no reason (a lot are printed and never retrieved from the printer).
Unless you have a very primitive e-mail system, it probably has some
system (usually called "folders") that can be used to permanently
store messages for recall at any time in the future. If the same people who
print messages for paper file systems would create the same structure in the
e-mail system with folders, it would accomplish the same goal, but would save
an enormous amount of paper (and trees).
Privacy, Are You Kidding?
Stop right where you are and set aside a couple of brain cells for the
following statement: there is no such thing as a private e-mail. I don't care
what anybody says, states, and swears or whatever, there is just no such thing
as private e-mail. The reason? Keep reading.
With some e-mail systems, the e-mail administrator has the ability to
read any and all e-mail messages. If this is the case where you are located you
better hope that there is an honest and respectable person in that position.
Some companies monitor employee e-mail (I consider this one of the worst
forms of censorship). The reasons for this obtrusive behaviour range from
company management wanting to make sure users are not wasting time on frivolous
messages to making sure that company secrets are not being leaked to
unauthorized sources.
E-mail software is like all software in that occasionally things go
wrong. If this happens, you may end up receiving e-mail meant for another
person or your e-mail may get sent to the wrong person. Either way, what you
thought was private is not private anymore.
Somewhere in the world there is a person (usually a hacker) who is able
to read your e-mail if he/she tries hard enough. Of course "Tries hard
enough" is the key. It's not that simple to read another person's e-mail
(usually). There are (usually) security measures in place to prevent this from
happening, but no security is one hundred percent hacker-proof. I have
"usually" in parenthesis in the prior two sentences because I'm
making the assumption that the person/persons who install and operate your
e-mail system have taken the necessary precautions. Of course, the same must
also be true for the person/persons on the receiving end of your e-mail.
So where does this leave us. First, let me reiterate the initial
statement: there is no such thing as a private e-mail. Got it? Second, don't
send anything by e-mail that you would not want posted on the company bulletin
board. If it's safe enough for the bulletin board, it's safe enough for e-mail.
Finally, if you are debating whether or not to send something personal by
e-mail, either deliver it by hand or send it by snail mail.
If You Send It from the Office, It Comes From the Office
Personal e-mails sent from the office are regarded as official company
communications regardless of content and could possibly expose you and your
company to unnecessary risk. Scary, huh?
Flames
What is a "flame" or specifically what does it mean "to
be flamed?" To be flamed means that you've sent an e-mail to a person(s)
that has caused that person(s) to respond in many, not-so-nice words. It's
basically a verbal attack in electronic form. I would provide examples, but I'm
not too sure of the age of my audience and I, in turn, do not want to end up
getting flamed from the readers of this document.
Sometimes the reason for a flame is quite obvious (keep reading), but in
other cases you just never know. You might send what you think is a harmless
e-mail to ten people. Nine people respond in a rational tone while number ten
sends you a flame. Just remember that everyone sees the world differently. You
may be lucky and spend your whole life dealing only with the people in the
group of nine, but I'll bet that sooner or later you will run into person ten.
How do you respond to flame? Tough question. The best answer would be to
ignore it and go about your life as logical and rational human being. If this
is not your first reaction, it probably will be after you've been flamed a
couple dozen times. You will find out that responses just aren't worth the
effort. Remember that old saying about "You can please some of the
people...".
If you do choose to respond you will probably end up in what is known as
a "flame war". This is where two or more people end up exchanging
flames for an extended period of time, usually to the point that users start
making references to one's mother, one's mental capability, etc... At some
point, all those participating in the war will eventually forget what
originally started it and go back to being normal human beings.
Never been flamed? Well if you are begging for it, I would suggest one
of the following:
Send an e-mail in all UPPER-CASE. Use of upper-case words is the
equivalent of shouting in some one's ear. ONLY use upper-case words when trying
to make a point (such as I just did). Even at that, you should be careful with
who you are exchanging messages.
Make a comment about grammar or punctuation. Nobody wants to
feel like they are exchanging e-mail with their eighth-grade English teacher.
Send a mass-mailing advertisement. This is numero uno on the don'ts
list and will generate more flames than the devil himself.
Think about the amount of junk mail you receive everyday by snail mail.
Even though you don't want it, you find you must look through all of it because
somewhere in that stack of unwanted advertisements and wasted paper could be
your monthly water bill. The same principle applies to the e-mail. Would you
want to search through a mailbox full of advertisements simply to find that
all-important message from your boss?
Request computer help without providing system-specific information. For example, if
I submitted an e-mail that stated "I've got this problem with
Word...". Well is that Word 97, Word 98, Word 2000, Word for XP or Word
for 2003? Tell them the version and if there are any service releases
installed.
Remember, the world (and its users) is made up of every kind of computer
imaginable, from PCs to Macs to Linux workstations to the one your neighbor
assembled in his garage.
The correct method would be to list all the system specifics first, then
describe the problem or question. For example, if I were seeking answers to
questions about Microsquish Word for my computer at home, I would list Windoze
2000 with SP5, Orfice 2000 with SR3, HP Kawack, dual Pentium IIs, 512MB of RAM
and 4GB SCSI hard drive and then state the problem in detail.
Better Than Snail Mail
You would think that since e-mail is electronic and electronic
information is supposed to move at the speed of light, your e-mail message
would arrive seconds after you send it. If you're sending e-mail to the person
in the office next to yours it might happen that way. In most cases, however,
the message will probably take anywhere from a couple of minutes (majority of
the time) to a couple of days (in which case there is usually a problem).
Think of it this way. Sending e-mail locally is as easy as delivering it
by hand. Following that premise, if you had to hand deliver mail to someone
clear across the country, doesn't that take a little more effort?
The reason it takes longer is that in the transmission of a message from
point A to point B, the message may pass across one, two, or up to
who-knows-how-many different types of mail systems before it reaches its
destination. Remember my earlier statement? All computers (and e-mail systems)
are not the same.
No matter how far away you are sending your e-mail message I'll
guarantee that it will beat snail mail. On top of that you save the cost of a
stamp.
A Blessing and a Curse
E-mail is a conversation that does not require an immediate response
(like a telephone). If someone calls you on the telephone, you pick it up
(unless you have an answering machine, voice mail or you are just plain rude)
and the conversation begins. This is an interactive conversation.
With e-mail you send a message and then wait for a response. The
response may come in five minutes or the response may come in five days. Either
way it's not an interactive conversation.
If a hundred people send you e-mail in one day, so what? You didn't have
to talk with all one hundred. Just think of all the hellos, good-byes and other
unnecessary chit-chat you avoided. With e-mail you only deal with their
messages (which usually omit hellos, good-byes and such) and you deal with them
on your own time. That's the blessing.
Now for the curse.
Too many users assume that the minute someone receives an e-mail it, the
person will read it. Bad assumption.
If you schedule a meeting for an hour from now and send an e-mail to
each attendee, the chance that all the attendees will read that message within
the hour will be pretty small. On the other hand, if you schedule the meeting
for the next day, the chance that they will read the message will be pretty
high. Remember, e-mail is not designed for immediacy (that's why you have a
telephone), it's designed for convenience.
Some (not all) e-mail systems have features that try to combat this
problem. These features (usually called "notification") will notify
you when a person has received your e-mail and may also notify you when the
person has read it (really all it can do is assume you that the person has
looked at the first screen of the message -- it has no way to know if the
person has read the message word for word). Referring back to the example in
the last paragraph, you could check to see who has checked their e-mail before
the meeting and then telephone those who have not read it.